Powered by Bioz
PART/ 85108021002
pco.flim X
The pco.flim X is a new version of the first frequency domain (FD) Fluorescence Lifetime Imaging Microscopy (FLIM) camera using a fast modulatable CMOS sensor with two readout-taps per pixel. It offers an improved cooling, which achieves -5°C with forced air cooling and -20°C image sensor temperature with liquid cooling. All of this reduces the readout noise to 33 [e-] and extending the usable exposure times to 4 instead of 2s. Therefore, the pco.flim X remains the frequency domain FLIM camera system with the largest resolution of 1008 x 1008 pixel and the highest maximum frame rate of 45 double image/s on the market.
- Excellent resolution of 1008 x 1008 pixels
- Can measure fluorescence lifetimes from 0.5 ns – 100 µs
- Image sensor thermoelectrically cooled down to -5°C (air) / -20 °C (liquid)
- Maximum frame rate of 45 double images/s at full resolution
| Length | 109.0 mm |
| Weight (kg) | 2.4 |
| Dynamic Range (log) | 60.0 dB |
| Forced Air | true |
| Readout Noise RMS | 15.0 e- |
| Pixel Size (H x V) | 5.6 x 5.6 |
| Thermo Electric Cooling | true |
| Frame rate (Full Sensor) | 45.0 fps |
| Peak Quantum Efficiency | 39.0 % |
| Peak Quantum Efficiency Wavelength | 550.0 nm |
| Sensor Technology | Modulatable CMOS |
| Sensor Version | Custom Design QM-FLIM II |
| Operational Modes | Standard |
| Dynamic Range A/D Converter | 14 bit |
| Dynamic Range | 1024:1 |
| Resolution (H x V) | 1008 x 1008 |
| Sensor Diagonal | 8.1 mm |
| Liquid Cooling | true |
| Included Lens Mount | C-Mount |
| Data Interface | USB 3.0 |
| Line Scanning | false |
| Global Reset | true |
| Trigger Input Signals | exposure start (phase sequence trigger) |
| Global Shutter | false |
| Region of Interest Vertical (ROI) | 1 rows |
| Non Linearity | 1.0 % |
| MTF (Theoretical) | 108.6 lp/mm |
| Optional Lens Mount |
F-Mount TFL-Mount |
| Spectral Range Minimum | 400 nm |
| Dark Signal Non-Uniformity DSNU | 56.0 e- (rms) |
| Default Read Out Mode | Standard |
| Operating Temperature Range | +10 °C to +40 °C |
| Sensor Manufacturer | PCO |
| Power Supply | 90-260 VAC (24 VDC opt.) |
| Sensor Dimensions (H x V) | 5.7 x 5.7 |
| Spectral Range Maximum | 950 nm |
| Direct Mounting Distance (No Camera Flange) | 7.4 mm (±10 %) |
| Chroma | mono |
| Rolling Shutter | false |
| Humidity Range (Non-Condensing) | 10 % to 80 % (recommended < 65 %) |
| Trigger Cable Connector | SMA |
| Double Shutter | false |
| Power Consumption | max. 50 W |
| Storage Temperature Range | -10 °C to +60 °C |
| Compliance Label |
CE FCC |
| Region of Interest Horizontal (ROI) | 16 columns |
| Trigger Output Signals |
exposure busy gate (light enable) |
| Modulation Frequency External | 500 kHz - 40 MHz |
| Modulation Signal Shape | sinusoidal / rectangular |
| Modulation Frequency Internal | 5 kHz - 40 MHz |
| Data Source | v1.0.0 |
| Part Number | 85108021002 |
Lifetime from 0.5 ns to 100 µs
- Frequency synthesizer 5 kHz - 40 MHz
Improved cooling of image sensor down to - 5 °C (air) / - 20 °C (liquid)
- High frame rate 45 double frames / s
- Unique resolution of 1008 x 1008 pixels
- Lightsheet Fluorescence Microscopy with Fluorescence Lifetime Imaging
- High-resolution fluorescence lifetime imaging in widefield microscopy
- Instant FRET measurements by using the donor fluorescence lifetime
- 2D measurements with optical chemical sensors
- Digital staining by using the endogenous fluorescence lifetime
- Semiconductor quality control
- Whole Slide Scanning
- Confocal Spinning Disk Microscopy
- Solar cell research and quality control (perovskite)
- Environmental micro plastic detection
- Improved classification of used wood
- Use of optical chemical sensors in micro-fluidics
PCO_QE_Curve_flim.X
| Length | 109.0 mm |
| Weight (kg) | 2.4 |
| Dynamic Range (log) | 60.0 dB |
| Forced Air | true |
| Readout Noise RMS | 15.0 e- |
| Pixel Size (H x V) | 5.6 x 5.6 |
| Thermo Electric Cooling | true |
| Frame rate (Full Sensor) | 45.0 fps |
| Peak Quantum Efficiency | 39.0 % |
| Peak Quantum Efficiency Wavelength | 550.0 nm |
| Sensor Technology | Modulatable CMOS |
| Sensor Version | Custom Design QM-FLIM II |
| Operational Modes | Standard |
| Dynamic Range A/D Converter | 14 bit |
| Dynamic Range | 1024:1 |
| Resolution (H x V) | 1008 x 1008 |
| Sensor Diagonal | 8.1 mm |
| Liquid Cooling | true |
| Included Lens Mount | C-Mount |
| Data Interface | USB 3.0 |
| Line Scanning | false |
| Global Reset | true |
| Trigger Input Signals | exposure start (phase sequence trigger) |
| Global Shutter | false |
| Region of Interest Vertical (ROI) | 1 rows |
| Non Linearity | 1.0 % |
| MTF (Theoretical) | 108.6 lp/mm |
| Optional Lens Mount |
F-Mount TFL-Mount |
| Spectral Range Minimum | 400 nm |
| Dark Signal Non-Uniformity DSNU | 56.0 e- (rms) |
| Default Read Out Mode | Standard |
| Operating Temperature Range | +10 °C to +40 °C |
| Sensor Manufacturer | PCO |
| Power Supply | 90-260 VAC (24 VDC opt.) |
| Sensor Dimensions (H x V) | 5.7 x 5.7 |
| Spectral Range Maximum | 950 nm |
| Direct Mounting Distance (No Camera Flange) | 7.4 mm (±10 %) |
| Chroma | mono |
| Rolling Shutter | false |
| Humidity Range (Non-Condensing) | 10 % to 80 % (recommended < 65 %) |
| Trigger Cable Connector | SMA |
| Double Shutter | false |
| Power Consumption | max. 50 W |
| Storage Temperature Range | -10 °C to +60 °C |
| Compliance Label |
CE FCC |
| Region of Interest Horizontal (ROI) | 16 columns |
| Trigger Output Signals |
exposure busy gate (light enable) |
| Modulation Frequency External | 500 kHz - 40 MHz |
| Modulation Signal Shape | sinusoidal / rectangular |
| Modulation Frequency Internal | 5 kHz - 40 MHz |
| Data Source | v1.0.0 |
| Part Number | 85108021002 |
Lifetime from 0.5 ns to 100 µs
- Frequency synthesizer 5 kHz - 40 MHz
Improved cooling of image sensor down to - 5 °C (air) / - 20 °C (liquid)
- High frame rate 45 double frames / s
- Unique resolution of 1008 x 1008 pixels
- Lightsheet Fluorescence Microscopy with Fluorescence Lifetime Imaging
- High-resolution fluorescence lifetime imaging in widefield microscopy
- Instant FRET measurements by using the donor fluorescence lifetime
- 2D measurements with optical chemical sensors
- Digital staining by using the endogenous fluorescence lifetime
- Semiconductor quality control
- Whole Slide Scanning
- Confocal Spinning Disk Microscopy
- Solar cell research and quality control (perovskite)
- Environmental micro plastic detection
- Improved classification of used wood
- Use of optical chemical sensors in micro-fluidics
PCO_QE_Curve_flim.X
Subscribe Now!
Floating Web Forms block
Join the PCO Circular newsletter for early access to insights on our high‑performance imaging cameras. Receive the latest application notes, expert webinars, technical articles, educational videos, product innovations, and industry events designed for scientific, microscopy, research, and industrial imaging applications.
Floating Web Forms block
