PART/ 1101310 Series
-150kV, 9kW High-Voltage DC Power Supply 1101310
The High-Voltage Power Supply is a highly regulated power supply. The supply provides high voltage and has electron-beam emitter, filament power and closed-loop emission current control if used as an E-Gun power supply. High-frequency power conversion technology is used for all power supply functions. The unit is designed to run continuously at full output.
- The high-voltage output of the supply is single-ended, and can be varied from near 0 to negative 150 kV. Maximum emission current is 58.0 mA at full output voltage
- Emission current regulation is achieved through control of emitter’s filament current. Maximum filament current is 18 A into a 1 ohm load
- The power supply is comprised of a Converter Assembly and a High Voltage Tank Assembly. The High-Voltage Tank Assembly is filled with oil for purposes of electrical insulation and cooling
- Control of the power supply is performed by 15 V or 24 V interface signals supplied by the customer
- Extensive internal interlocks and diagnostics are incorporated to provide reliable and safe operation, as well as to facilitate installation
| Input Voltage | 208 Vac +/- 10%, 3-phase |
| Output voltage | Negative 150 kVdc |
| Output Current | 58 mA dc |
| Filament Power | 18 Vdc 18 Adc |
| Line & Load Regulation | Better than +/- 0.5% |
| Operating temperature | 0 to 40 degrees C |
| Safety Protection Circuitry | Arc detect, Over voltage and current, Filament over current, Over temperature |
| Input Voltage | 208 Vac +/- 10%, 3-phase |
| Output voltage | Negative 150 kVdc |
| Output Current | 58 mA dc |
| Filament Power | 18 Vdc 18 Adc |
| Line & Load Regulation | Better than +/- 0.5% |
| Operating temperature | 0 to 40 degrees C |
| Safety Protection Circuitry | Arc detect, Over voltage and current, Filament over current, Over temperature |